|
|
| (Not recommended for new designs) |
The Dual 2 Gbps Fibre Channel (FC) PMC (PCI Mezzanine Card) Adapter offers dual 2 Gbps Fibre Channel communication links on multimode or singlemode fibre media. This adapter provides optimal flexibility by supporting all Fibre Channel topologies, including Arbitrated Loop, with full duplex communications on both channels. It is available in air-cooled versions : ruggedised, industrial and commercial.
Architecture
The Dual 2 Gbps FC PMC Adapter uses an embedded RISC processor to handle all the protocol processing and data transfers. This reduces overhead on the host processor, thus providing higher network data throughputs. Data transfers from the adapter are controlled independently using single channel Bus Mastering or Scatter Gather Mode.
Integrated 2 Gbps Optical Transceivers : Dual integrated transceivers provide considerable reliability, speed and distance interconnect technology. Both channels independently support autonegotiation down to 1 Gbps, allowing the separation of legacy and next generation devices.
Arbitrated Loop Support : The Dual 2 Gbps FC PMC Adapter’s Integrated Link Controller is Arbitrated Loop (FC-AL-2 R7.0) compliant and performs all Link operations. The Internal Controller monitors the Link State and strictly adheres to the Loop Port State Machine, ensuring maximum system interoperability.
Features
- Two independent channels
- 2 Gbps transfer rates on each channel on fibre media
- High-performance context management
- Full simultaneous target and initiator operations
- Data transfer via Bus Mastering to/from PCI-bus
- Onboard SRAM for data storage
- Extensive use of SMT devices to reduce RF noise
- Integrated FPGA design reduces costs and increases reliability
Applications
- Distributed real-time applications in harsh environments
- High-Performance Multimedia Applications
- Mission-Critical Applications
- High-Speed Sensor Integration
- Avionics
- Vetronics
- Distributed Digital Voice and Video Applications
- Industrial Simulation
- Host Attach for mass storage sub-systems
Dual 2 Gbps Fibre Channel PMC Adapter Specifications
| Bus Interface |
64-bit, 66 MHz PCI-bus (32-bit, 33 MHz compatible) Electrically : 5 V signaling, PCI Rev. 2.2 Mechanically : Single CMC formfactor IEEE P1386 |
|||
| Compliance |
FC-PH, FC-AL2 R7.0, FC-FCP, FC-PLDA, FC-FLA |
|||
| LAN Controller | LSI 929 | |||
| RAM | 128 kBytes x 32 | |||
| Flash EPROM | 512 kBytes x 8 | |||
| I/O Options |
Front-panel I/O only, SFF/LC connectors |
|||
| Interrupts | PCI INT A and B | |||
| Dimensions | 149,00 mm x 74,00 mm x 9,80 mm | |||
| Mass | 80 g ± 10 g | |||
| Power Requirements | +5 V 1,2 A (fibre) +5 V 1,5 A (max) |
|||
| MTBF | Figures according to MIL-HDBK-217F, Parts Count Method : | |||
|
Ground, Mobilej Naval, Shelteredj Airborne, Inhabited Cargo |
Tj = 65 C Tj = 65 C Tj = 75 C |
Ta = 45 C Ta = 40 C Ta = 55 C |
17 000 hrsj 23 000 hrsj 17 000 hrs |
|
|
Software Drivers |
Various software drivers offered including for VxWorks, Linux, Windows 2000 and Windows XP operating systems as standard; others are costed options. | |||
| Protocols |
Fibre Channel/Internet (singular or intermixed) :
IP
Traffic can be intermixed with SCSI traffic. |
|||
| Options |
|
|||
|
Related Web Link |
||||
|
Downloads |
||||
Environmental Specifications
|
|
Commercial |
Industrial |
Ruggedised |
|
Temperature |
|
|
|
|
Humidity |
0 - 90% | 0 - 95% | 0 - 95% |
|
Shock |
N/A |
30 g peak for 11 ms | 40 g peak for 11 ms |
|
Vibration |
|
|
|
Designations
| CCII/FC/PMC/2P/MM/COM |
Commercial |
SFF/LC |
Front-panel I/O |
Dual Link Dual Link Dual Link |
Multimode |
PMC-N003 Issue 3 Rev. 1 2005-07-20
C²I² Systems (Pty) Ltd • P.O. Box 171 • Rondebosch
7701 • South Africa
Telephone : (+27 21) 683 5490 • Facsimile : (+27
21) 683 5435 • URL : http://www.ccii.co.za/