|
|
GPS + High-Speed Serial I/O PMC Adapter |
|
(Not recommended for new designs) |
PDF print version of this specification :
A4
or Letter |
The GPS + High-Speed Serial I/O PMC (PCI Mezzanine Card) Adapter provides an integrated GPS
(Global Positioning System) receiver plus four channels of high-speed (>10 Mbps) serial I/O and one channel of UART (Universal Asynchronous Receiver/Transmitter)
(<1 Mbps) serial I/O. An external DGPS (Differential GPS) input is provided.
The adapter is available in both conduction-cooled (CC) and air-cooled versions
: ruggedised, industrial and commercial.
Architecture
The GPS + High-Speed Serial I/O PMC Adapter uses the Motorola MPC860 PowerQUICC Integrated
PowerPC Microprocessor as a communication controller.
Features
This board offers full GPS functionality to be integrated with the host in
addition to an extra four channels of high-speed serial I/O and one channel
of UART-compatible serial I/O.
Conduction-Cooling
The conduction-cooled GPS + High-Speed Serial I/O PMC Adapter conforms to the CCPMC (Conduction-Cooled
PCI Mezzanine Card) Standard, namely ANSI/VITA 20-2001.
Applications
- Distributed applications in harsh environments
- Avionics
- Mission-critical applications
- Position tracking applications
GPS + High-Speed Serial I/O PMC and CCPMC Adapter Specifications
Bus Interface |
32-bit, 33 MHz PCI-bus
Electrically : 5
V signaling, PCI Rev. 2.2
Mechanically : Single CMC
formfactor IEEE P1386 |
Serial Interface |
RS232/422/485 configurable
|
Serial Channels |
4 x SCCs
(Serial Communication Controllers) for high-speed serial links
-
Synchronous or Asynchronous
2 x SMCs (Serial Management Controllers) for UART serial
links
- Asynchronous only |
DGPS Interface
|
Front or Rear-panel RS232 Signals : RxD, TxD
|
GPS Receiver |
L1
Frequency, C/A Code, 12 Channel |
GPS Data Format |
NMEA
0183 |
DGPS Correction
Data Format |
RTCM
SC-104 |
GPS Update Rate |
1
Hz max |
Bit Rates |
User-programmable
standard rates up to 115,2 kbps |
I/O Addresses |
Automatic
assigned to the slot by PCI Rev.
2.2 Plug-and-Play |
I/O Options |
Air-cooled
versions use front-panel I/O with MCX connector for GPS Antenna.
Conduction-cooled version uses rear connector PMC JN4 I/O and has various MCX
connector alignment options to facilitate GPS antenna routing in
conduction-cooled installation. |
Interrupts |
PCI
INT A |
Operating Limits |
Altitude
< 18 000 m, Velocity < 515 ms-1
Either limit may be exceeded, but not both – COCOM (Coordinating
Committee on Export Controls) restrictions apply |
Receiver Type
|
16-Channels
|
Max Update Rate
|
4 Hz
|
Accuracy
|
Position : 2,5 m CEP (Circular Error Probability); 5,0
m SEP (Spherical Error Probability)
|
Acquisition
|
Cold Start = 36 s; Warm Start = 33 s; Hot Start <3,5
s; Aided Start = 5 s
|
Timepulse Accuracy |
RMS 50 ns; 99% <100
ns |
Dimensions |
Air-cooled
: |
149,00
mm x 74,00 mm with envelope according to CMC specification |
Conduction-cooled :
|
143,65
mm x 74,00 mm with envelope according to VITA 20 specification |
Outside Dimensions :
|
160,00 mm
x 75,00 mm x 15,00 mm
|
Power Requirements |
+5 V at 0,6 A |
Mass |
60 g ±
10 g |
MTBF |
Figures
according to MIL-HDBK-217F, Parts Count Method (Predicted) : |
Ground, Mobilej
Naval, Shelteredj
Airborne, Inhabited Cargo |
Tj = 65 C
Tj = 60 C
Tj = 75 C |
Ta = 45 C
Ta = 40 C
Ta = 55 C |
56 000 hrsj
97 000 hrsj
75 000 hrs |
Software Drivers |
Various software drivers offered including for VxWorks, Windows
NT, Windows 2000* and Windows XP* operating systems as
standard; others are costed options. (*Standard PC HAL only)
|
Supporting Software |
Sample driver usage software (C/C++ source
code)
|
Options
|
Port
software drivers to various other operating systems on request
|
Environmental Specifications
|
Commercial
|
Industrial
|
Ruggedised/Conduction-Cooled
|
Temperature - Operating - Storage
|
0 C to +55 C
-40 C to +85 C
|
-15 C to +75 C
-40 C to +85 C
|
-40 C to +
85 C
-55 C to +125 C
|
Humidity
|
0% to 90% |
0% to 95% |
0% to 95% |
Shock
|
N/A
|
30 g peak for 11 ms |
40 g peak for 11 ms |
Vibration - Sine - Random
|
2 g (peak) 10 Hz to 100 Hz
0,04 g²/Hz at 15 Hz to 2 kHz |
10 g (peak) 5 Hz
to 2 kHz
0,1 g²/Hz at 15 Hz to 2 kHz |
10 g (peak) 5 Hz
to 2 kHz
0,1 g²/Hz at 15 Hz to 2 kHz
|
Designations
CCII/SIO/PMC/4PA+GPS/FP/COM CCII/SIO/PMC/4PA+GPS/FP/IND CCII/SIO/PMC/4PA+GPS/FP/RGD CCII/SIO/PMC/4PA+GPS/BP/CC |
Commercial Industrial Ruggedised Conduction-cooled |
Front-panel or Backplane I/O Front-panel or Backplane I/O Front-panel
or Backplane I/O Backplane I/O
|
GPS + 4HSS I/O GPS + 4HSS I/O GPS + 4HSS I/O GPS + 4HSS I/O
|
PMC-N008 Issue 1 Rev.0 2005-07-20
C²I² Systems (Pty) Ltd • P.O. Box 171 • Rondebosch
7701 • South Africa
Telephone : (+27 21) 683 5490 • Facsimile : (+27
21) 683 5435 • URL : http://www.ccii.co.za/
Warning: include(bot_template.html): failed to open stream: No such file or directory in /home/httpd/html/www.ccii.co.za/blp/archive/pmc_gps-4hss.html on line 377
Warning: include(): Failed opening 'bot_template.html' for inclusion (include_path='.:/usr/local/lib/php') in /home/httpd/html/www.ccii.co.za/blp/archive/pmc_gps-4hss.html on line 377
|