|
|
4-Channel High-Speed Serial I/O PMC Adapter |
|
(Not recommended for new designs) |
PDF print version of this specification :
A4
or Letter |
The 4-Channel High-Speed Serial I/O PMC (PCI Mezzanine Card) Adapter provides
four channels of simultaneous, high-speed (>10 Mbps), bi-directional serial
communications, plus two UART (Universal Asynchronous Receiver/Transmitter)
(<1 Mbps) channels. All channels are configurable as RS232/422/485. The adapter is available in both conduction-cooled
(CC) and air-cooled versions : ruggedised, industrial and commercial.
Architecture
The 4-Channel High-Speed Serial I/O PMC and CCPMC Adapters are intelligent
adapters with onboard CPU and use the Motorola MPC860 PowerQUICC Integrated
PowerPC Microprocessor as a communication controller. The PowerQUICC processor
can easily be configured to implement different serial protocols, thus allowing
the adapter to keep up with technological advances.
Features
- Cost-effective and flexible option for systems that require
both high-speed, real-time communication links as well as some low-speed serial
links.
- Offers independent I/O processing offboard the host.
Conduction-Cooling
The conduction-cooled 4-Channel High-Speed Serial I/O PMC
Adapter conforms to the CCPMC (Conduction-Cooled PCI Mezzanine Card) Standard,
namely VITA 20-199x and is currently implemented in accordance with VITA
20-199x, Draft 1.8.
Applications
- Distributed real-time applications in harsh environments
- Mission-critical applications
- Avionics
- Vetronics
- High-speed sensor
integration
4-Channel High-Speed Serial I/O PMC and CCPMC Adapter Specifications
Bus Interface |
32-bit, 33 MHz PCI-bus
Electrically : 5
V signaling, PCI Rev. 2.2
Mechanically : Single CMC
formfactor IEEE P1386 |
Serial Interface |
RS232/422/485 configurable
|
Serial Channels |
4 x SCCs
(Serial Communication Controllers) for high-speed serial links
-
Synchronous or Asynchronous
2 x SMCs (Serial Management Controllers) for UART serial
links
- Asynchronous only |
CPU |
1 x Motorola
MPC860 PowerQUICC - Integrated PowerPC Microprocessor |
EEPROM |
EEPROM for
board ID (Plug-and-Play) and configuration options |
Bit Rates |
User-programmable
up to 4 Mbps |
I/O Addresses |
Automatic
assigned to the slot by PCI Rev. 2.2 Plug-and-Play |
I/O Options |
Front-panel and rear connector I/O options with various rear
connector PMC Jn4 I/O pin assignments. Conduction-cooled version
has rear connector I/O only.
|
Interrupts |
PCI
INT A |
DMA |
Automatic
depending on PCI slot |
Dimensions |
Air-cooled : 149,00
mm x 74,00 mm x 9,80 mm Conduction-cooled :
143,65
mm x 74,00 mm x 13,50 mm (VITA 20) |
Mass
|
80 g
± 10 g |
Power Requirements |
+5 V at 0,8 A |
MTBF |
Figures
according to MIL-HDBK-217F, Parts Count Method : |
Ground, Mobile
Naval, Sheltered
Airborne, Inhabited Cargo |
Tj = 65 C
Tj = 60 C
Tj = 75 C |
Ta = 45 C
Ta = 40 C
Ta = 55 C |
32 000 hrs
47 000 hrs
31 000 hrs |
Software Drivers |
Various software drivers offered including for VxWorks, Windows
NT, Windows 2000* and Windows XP* operating systems as standard;
others are costed options. (*Standard PC HAL only)
|
Protocols |
|
Supporting Software |
Sample driver usage software (C/C++ source
code)
|
Options |
- Solaris, QNX, AIX Drivers
- SS7, ISDN Protocol (Basic Rate and Primary
Rate)
- Ethernet
/ Fast Ethernet Option
|
Downloads
|
|
Environmental Specifications
|
Commercial
|
Industrial
|
Ruggedised/Conduction-Cooled
|
Temperature - Operating - Storage
|
0 C to +55 C
-40 C to +85 C
|
-15 C to +75 C
-40 C to +85 C
|
-40 C to +
85 C
-55 C to +125 C
|
Humidity
|
0 - 90% |
0 - 95% |
0 - 95% |
Shock
|
N/A
|
30 g peak for 11 ms |
40 g peak for 11 ms |
Vibration - Sine - Random
|
2 g (peak) 10
Hz to 100 Hz
0,04 g²/Hz at 15 Hz to 2 kHz |
10 g (peak) 5 Hz
to 2 kHz
0,1 g²/Hz at 15 Hz to 2 kHz |
10 g (peak) 5 Hz
to 2 kHz
0,1 g²/Hz at 15 Hz to 2 kHz
|
Designations
CCII/SIO/PMC/4P/FP/COM CCII/SIO/PMC/4P/FP/IND CCII/SIO/PMC/4P/FP/RGD CCII/SIO/PMC/4P/BP/CC/xx |
Commercial Industrial Ruggedised Conduction-Cooled
|
Front-panel or Backplane I/O Front-panel or Backplane I/O Front-panel
or Backplane I/O Backplane I/O
|
RS422/485/232 RS422/485/232 RS422/485/232 RS422/485/232
|
Note :
xx =
|
4 x SCC
|
2 x SMC
|
22
|
232
|
232
|
42
|
422/485
|
232
|
44
|
422/485
|
422/485
|
Standard oscillator is 39,3216 MHz. Other oscillator
frequencies (to support non-standard baud rates) indicated by
an additional /yy at the end of the part number.
|
SCC = Serial Communication Controllers SMC
= Serial Management Controllers
|
PMC-HSS-001 Issue 3 Rev. 1 2005-07-20
C²I² Systems (Pty) Ltd • P.O. Box 171 • Rondebosch
7701 • South Africa
Telephone : (+27 21) 683 5490 • Facsimile : (+27
21) 683 5435 • URL : http://www.ccii.co.za/
Warning: include(bot_template.html): failed to open stream: No such file or directory in /home/httpd/html/www.ccii.co.za/blp/archive/pmc_serial4hss.html on line 387
Warning: include(): Failed opening 'bot_template.html' for inclusion (include_path='.:/usr/local/lib/php') in /home/httpd/html/www.ccii.co.za/blp/archive/pmc_serial4hss.html on line 387
|