(C)Copyright 1991-1998 SysKonnect,
a business unit of Schneider & Koch & Co. Datensysteme GmbH.
All rights reserved
==========================================================================
UPPSMLID.TXT

Readme File for UPPSMLID.EXE
	SK-UPPS ODI MLID v2.01 Rev. B (960318)

May 07, 1998



This file contains
(1) overview
(2) installation instructions
    - how to install for NetWare VLM requester
(3) installation file examples
==========================================================================


(1) OVERVIEW
============

Within the framework of the SK-UPPS software, UPPSMLID.EXE is the
topology-specific Multiple Link Interface Driver (MLID) for the Open
Datalink Interface (ODI) by Novell.  The file includes the ODI drivers for
FDDI, Token Ring and Ethernet.
When UPPSMLID.EXE is started, the appropriate MLID driver will be loaded
automatically.
***


(2) INSTALLATION INSTRUCTIONS
=============================

HOW TO INSTALL FOR NETWARE VLM REQUESTER

If you like to install your workstation for using Novell's VLM Requester
please follow the steps below:

Step 1)	First you have to set up the NetWare Requester according to the
	instructions given by Novell.
        When Novell's installation program prompts for driver selection,
        select <OTHER DRIVERS> and provide the path to your ODI driver
        UPPSMLID (e.g. drive:\[path]\ODI on the installation medium).

Step 2) After you have successfully installed the VLM requester with your
	ODI driver, you have to copy UPPSFP.EXE to the directory where
	the NetWare requester is installed.
	Edit the file STARTNET.BAT according to the example below:
	Add a new line after LSL and insert C:\NWCLIENT\UPPSFP.EXE.


After setting up your workstation according to the instructions above,
you should reboot your system to load the netware drivers added to your
system files.
***


(3) INSTALLATION EXAMPLES
=========================

SAMPLE STARTNET.BAT

The STARTNET.BAT file should look like that:
	SET NWLANGUAGE=ENGLISH
	C:\NWCLIENT\LSL.COM
	C:\NWCLIENT\UPPSFP.EXE
	C:\NWCLIENT\UPPSMLID.EXE
	C:\NWCLIENT\IPXODI.COM
	C:\NWCLIENT\VLM.EXE

Note:	All programs which have been loaded in the above example can
	be completely unloaded from memory.  To do so, enter the
	programs in reverse order with the appropriate parameter:

	VLM -u 	
	IPXODI -u 	
	UPPSMLID -u 	
	UPPSFP -u
	LSL -u


SAMPLE NET.CFG

The NET.CFG configuration file should reside in the same directory as
the LSL or in the current directory.

For UPPSMLID-specific parameters refer to the section
	"Link Driver UPPSMLID"

For detailed information on structure and contents of the NET.CFG file
please refer to the ODI documentation by Novell.

;--------------------------------------------------------------------------
;               Sample Network Configuration File
;--------------------------------------------------------------------------
Link Driver UPPSMLID
	# MAX FRAME SIZE 4184
	# NODE ADDRESS 00005A123456L
	FRAME FDDI_SNAP
	# FRAME FDDI_802.2
	PROTOCOL IPX 8137 FDDI_SNAP

*** End of information file ***