(C)Copyright 1995-1996 SysKonnect,
a business unit of Schneider & Koch & Co. Datensysteme GmbH.
All rights reserved
==========================================================================
SKFP6DG.TXT

Readme File for SKFP6DG.6DG
	SK-NET FDDI PCI Diagnostics v4.01 (960605)

June 05, 1996


Version / Date of the referred subject:
	SKFP6DG.6DG v4.01 / 05-Jun-1996

This file contains
(1) Overview
(2) Supported Adapters
(3) Command Line Options
(4) How to use the Diagnostics Program
(5) History

===========================================================================


(1) OVERVIEW
============

This README explains how to use the program SKFP6DG.6DG to test your
network adapter.

Chapter 2 contains a list of all network adapters that are supported by this
program.

Chapter 3 describes the command line options that can be used when starting
the Diagnostic program.

Chapter 4 explains how to use the Diagnostic program to test your network
adapter.
***


(2) SUPPORTED ADAPTERS
======================

The program SKFP6DG.6DG supports the following network adapters:

	*) SK-NET FDDI PCI series
***


(3) COMMAND LINE OPTIONS
========================

The command line syntax of the program SKFP6DG.6DG is the following:
	SKFP6DG.6DG [-q] [-s] [-r] [-f] [-g] [int] [mfg] [wrap] [devn]

The parameters have the following meaning:

	-q		Query a specific device.
	-s		Setup for a specific device test.
	-r		Run test.
	-f		Free resources.
	-g		Called by the GUI diagnostics controller.
	int		Run interactive tests.
	mfg		Run manufacturing tests.
	wrap		Run wrap tests.
	devn		Specifies the nth occurence of the adapter
			('dev1', 'dev2', ...).
***


(4) HOW TO USE THE DIAGNOSTICS PROGRAM
======================================

The program SKFP6DG.6DG can be used in two different environments:
	- The GUI based "System Management Services".
	- The text based "System Management Services".
Both environments must be treated differently.


USE THE GUI BASED DIAGNOSTICS
-----------------------------

Step 1: Copy the file SKFP6DG.6DG to your SMS diskette.

Step 2: Start the GUI based "System Management Services" by pressing
	the 'F1' key during the boot process and inserting the SMS
	diskette into the Floppy Disk Drive.

Step 3: Select the "FDDI PCI" adapter icon in the test submenu.

Step 4: Start the test by selecting the "Test" Icon.


USE THE TEXT BASED DIAGNOSTICS
------------------------------

Step 1: Start the text based "System Management Services" by pressing
	the 'F4' key during the boot process and inserting the SMS
	diskette into the Floppy Disk Drive.

Step 2: Insert now the diskette which contains the file SKFP6DG.6DG into
	the Floppy Disk Drive and select option 3: "Test the Computer".

Step 3: Select the "FDDI subsystem" you want to test.

Step 4: Select the parameter you want to use with this test (Wrap test,
	Interactive test, Stop on Error and Loop test) by pressing the
	'F4' key.

Step 5: Start the test by pressing the 'F6' key.
***


(5) HISTORY
===========

v4.01
    New features:
	None.
    Problems fixed:
	- FORMAC register test fixed.
    Known limitations:
	None.
v4.00
    New features:
	None. (First Release)
    Problems fixed:
	None. (First Release)
    Known limitations:
	None.
*** End of information file ***