The Vehicle Management and Monitoring (VMM) Adapter provides an integrated solution for monitoring and reporting the geographic position, movement parameters and internal health of a vehicle.

The VMM Adapter incorporates a Global Positioning System (GPS) module, a Global System for Mobile Communication (GSM) module, autonomous data logging to onboard EEPROM, digital/analogue input as well as digital output functionality. An onboard rules engine allows easy and powerful user configuration. All VMM functions can be accessed using a powerful serial Application Program Interface (API). The adapter is available in the following industry standard compliant formfactors :

• PMC (IEEE Std 1386.1-2001)

• Conduction-Cooled PMC (CCPMC) (ANSI/VITA 20-2001)

Features

• Full GPS functionality with differential GPS input

• GSM V2.5 (GPRS with built-in TCP/IP stack and SMS communication options)

• 128 Kbit of EEPROM for the logging user or onboard VMM data

• A powerful serial API providing access to all VMM functions

• An onboard rules engine that allows control functions to operate without interaction with the host. (for example, the unit may be programmed to report position via GPRS and activate an alarm when the GPS speed exceeds a preprogrammed setpoint).

This adapter can be controlled in the following ways :

• External command via serial port (external I/O)

• External command from host via PCI UART serial interface

• External command via GSM (GPRS or SMS)

• Internal, stand-alone operation using rule and function engine

Applications

• Vehicle tracking applications

• Position tracking applications

• Remote data logging using GPRS/SMS

• Remote control using GPRS/SMS

• Stand-alone data logging and control

• Easy to use GSM (GPRS/SMS) communication module

Environmental Monitoring and Control Adapter Specifications
Bus Interface	32-bit, 33/66 MHz Electrically : PCI Rev.2.3, 3,3 V and 5,0 V signalling
I/O Addresses	Automatic assigned to the slot by PCI Rev. 2.3 Plug-and-Play.
EEPROM	1 K EEPROM for board PCI ID (Plug-and-Play) and configuration options. 64 K EEPROM for configuration and user parameters, accessed via the embedded firmware.
Interrupts	PCI INT A
I/O Interface	Various front panel (PMC and PC/104+) and rear connector (PMC and CCPMC Jn4) pin assignments.
Serial Interface	RS-232 compatible asynchronous transfer with modem control signals
Serial Channels	1 x RS-232 channel with GPS option (includes RS-232 interface for DGPS)
GPS Receiver	L1 Frequency, C/A Code, 12 Channel
GPS Data Format	Serial API
GPS Update Rate	1 Hz
GPS Operating Limits	Altitude < 18 000 m, Velocity < 515 m/s, if GPS option is fitted. COCOM (Coordinate Committee on Export Controls) restrictions apply.
GSM Module	GPRS and SMS
GSM Data Format	Serial API
EEPROM	128 Kbit for data logging or general storage
EEPROM Data Format	Serial API
Analog Inputs	2
Digital Inputs	8
Digital Outputs	8
Analog / Digital I/O	Serial API
Data Rate	4 800 bit/s to 38,4 kbit/s (9 600 bit/s standard)
CAN Interface	Two Controller Area Network (CAN) interfaces provided, conforming to CAN Specification Version 2.0 Part A and B, with a maximum bit rate of 1 MHz.
Power	5,0 V @ 0,60 A (PCI / ISA supply) 6,0 V to 60,0 V @ 0,45 A (external supply)
Software Drivers	The EMAC uses an industry standard UART to the user. As such, no specific driver is required for most Operating Systems. VxWorks source code to locate the device in PCI spates and obtain a pointer to the UART is supplied as an example.

Physical Characteristics
Formfactor	Dimensions	Mass
PMC (IEEE Std 1386.1-2001)	149,00 mm x 74,00 mm, conforming to CMC envelope	95 ± 10 g
CCPMC (ANSI/VITA 20-2001)	143,65 mm x 74,00 mm, conforming to VITA 20 envelope	70 ± 10 g
PC/104-Plus (PC/104-Plus v2.0)	95,9 mm x 90,2 mm x 23,8 mm	95 ± 10 g

Part Designations
Part Number	Formfactor	Grade	I/O Options
CCII/VMM/PMC/FP/COM	PMC	Commercial	Front Panel or Backplane I/O
CCII/VMM/PMC/FP/IND	PMC	Industrial	Front Panel or Backplane I/O
CCII/VMM/PMC/FP/RGD	PMC	Ruggedised	Front Panel or Backplane I/O
CCII/VMM/PMC/BP/CC	CCPMC	Conduction-Cooled	Backplane I/O

CLCPS003  Rev.1  2009-07-26
CCII Systems (Pty) Ltd • P.O. Box 171 • Rondebosch 7701 • South Africa 
Telephone : (+27 21) 683 5490 • Facsimile : (+27 21) 683 5435 • WWW : www.ccii.co.za